Edge gateway · OEE / TEEP

Your PLC already knows. Now you will too.

Taktos Edge reads OEE and TEEP straight from the line you already run. No new sensors. No rip-and-replace. See it live on a screen at the machine, or across the line from one dashboard.

Book a demo See how it connects

Taktos Edge, from Assembly & Automation Technology. Custom machine builders and integrators with 40 years on the factory floor — the same team that wires the gateway into your panel and stands behind it.

Taktos — Live OEE RUNNING

uptime 1h 28m

MachineInv Line 1

OperatorJ. Carter

PartPN-4471

RecipeStd-A

Shift2

Overall Equipment Effectiveness

91.0%

Cycles · shift

301

287 pass · 14 reject

Parts / hour

208/hr

live rate

Shift uptime

1h 28m

since shift start

A 97.5%

P 97.9%

Q 95.3%

Production Metrics

Last cycle

17.2s

target 18.0s

Avg cycle

17.3s

100 samples

Yield

95.3%

287 pass / 301 total (target 95%)

Throughput

208/hr

based on avg cycle

Taktos Edge

Every number you see updates live, straight from the PLC. Capture cycle time, yield, throughput and the A/P/Q behind the OEE score. No manual entry, no end-of-shift reconciliation.

One line, one screen. Now multiply it across the floor

Across the floor

Every machine, one pane of glass.

Roll the same gateway out, headless across the plant, with one dashboard for every line. Track pace against target hour by hour, see each machine flip between running, idle, and down the moment it changes. And rank downtime by reason, so the biggest loss is obvious.

Inv Line 1Running

97.9%

OEE · 208/hr

Weld Cell 2Running

92.4%

OEE · 142/hr

Press 3Running

88.1%

OEE · 96/hr

Kit LoaderDown

Stopped

guard fault · 4m

Assembly 4Running

95.3%

OEE · 176/hr

Pack & SealRunning

99.0%

OEE · 240/hr

Test Cell 1Changeover

Idle

job change · 6m

CNC Mill 2Running

86.7%

OEE · 64/hr

Taktos Edge line-pace board: per-station rate vs target, hour-by-hour actuals, and live production-rate sparklines across five stations. — Line pace — every station vs target, by the hour

Taktos Edge plant-floor status board: running, down, blocked and starved machines across three lines with fault codes and shift KPIs. — Maintenance View — live status for every machine

Taktos Edge downtime-by-reason board: this shift's stops ranked by fault code — fill valve fault, fill level reject, conveyor jam — with total downtime, down-event count and MTTR. — Downtime — every stop, ranked by severity

Built into the line, not bolted on

It speaks to your machine because we speak to machines.

Most OEE software is written by people who have never wired a panel. Taktos Edge comes from the other direction — from a shop that has been commissioning capital equipment for 40 years.

AAT technician wiring the Taktos Edge gateway into a control panel — installed and commissioned on the line, not a license you wire up alone.

Straight off the PLC

Reads over EtherNet/IP from the PLCs, Robots and Inspection Systems we build on every day. No bolt-on sensors, no PLC swap, no guessing at your tags.

Programmed to your machine

Ladder logic, drivers and communications solutions: AAT writes control code for a living, so the gateway maps to your machine's real logic and tags, not a generic template. The custom integration most OEE vendors can't touch.

We install it ourselves

Not a license you wire up alone. AAT puts the box in the panel, connects it to the controller, and commissions it on your line, then stands behind the whole path from controller to screen.

Two ways to run it

One box. Answers at the line or across the whole plant.

On a monitor

See every stop the moment it happens

A live screen where operators stand. OEE, TEEP and machine status update the instant a stop hits — so the line reacts now, not at end of shift. Andon-style, with zero extra infrastructure.

Headless

Every machine on the floor, one view

Drops into the control cabinet, no display. Feeds a plant-wide or cloud dashboard — the scalable way to see and compare every line from one place.

Start with a screen on one line. Roll out headless across the plant. Same product, no migration.

Standard dashboards

The numbers that tell you where the line is losing time.

OEE

Real-time OEE

Availability × performance × quality, live off the line, not a number someone keys in at end of shift.

TEEP

True capacity

Your output measured against total calendar time, so you can see the hours hiding in the unscheduled gaps.

A·P·Q

Loss breakdown

Availability, performance and quality split apart, so the loss points to a cause instead of a feeling.

STOPS

Downtime reasons

Stops captured and categorized as they happen, straight from machine state - no clipboard, no recall.

Custom add-ons

When standard isn't enough, we build it.

Add-on

Predictive maintenance

Trend faults, cycle drift and wear from the data already flowing through the gateway — catch it before it stops the line.

Add-on

Part-number assignment

Push the right job and recipe down to the machine, so the line is always set up for what it's actually building.

Add-on

Work-order entry

Run orders straight from the floor, written back to the controller. The gateway becomes a two-way layer, not just a window.

Need a screen or a workflow that doesn't exist yet? Tell us what you need to see and run, from a view for a specific task, station or role, or write-back into the line. Our controls team builds it around your floor and your process.

See it on your line

The quickest start is one screen on one machine.

We wire Taktos Edge to the PLC and put live OEE and TEEP in front of your team, then build out from there. Book a demo and we'll show it live on your own line.

Book a demo Visit AAT

Talk to us · sales@taktosedge.com · 781-935-1991 · Read the FAQ